Hydraulic cylinders are extremely important components of agricultural, construction and industrial machines that are responsible for the linear movement of the piston rod. This is carried out with little inertia and using the energy stored in the working environment under pressure. It is the reduction and increase of its pressure that allows you to move significant loads. The high intensity of work contributes to the occurrence of various failures in the actuators. In this case, it is worth using the service of their regeneration.What does a hydraulic cylinder consist of?
Hydraulic cylinders consist of many interacting elements. Their design consists of a piston, a cylinder, a rod, piston guide rings, as well as a cylinder bottom and a cylinder bottom lug. Important elements of hydraulic cylinders are also packing boxes, oil rings, rod eyelets with a self-aligning bearing, sealing systems (for example, stuffing boxes and buffer seals), as well as rod guide rings. Regardless of the manufacturer, the design of such components is the same. This is one of the reasons why hydraulic cylinders are easy to maintain, and the profitability of their regeneration compared to the purchase of a new device is very high.Causes of damage to hydraulic cylinders
Hydraulic cylinders used in construction and agricultural machines, as well as in industrial machines, are exposed to enormous forces. They are also affected by adverse weather conditions, aggressive liquids, as well as high and low temperatures. It is not surprising that these devices require maintenance after several years of intensive operation. Most often this is caused by the depressurization of the oil seal. Damage often occurs as a result of wear of the piston rod guides.To extend the service life of hydraulic cylinders, pay attention to the contaminated working fluid. Timely oil change is the basis of their effective work. You should also pay attention to the pressure in the system. Both too high and too low indicators contribute to both minor and major failures. Workshops engaged in the restoration of hydraulic cylinders often also accept orders for the repair of components with external damage and maintenance of seals.The volume of regeneration of hydraulic cylinders
The best workshops engaged in the regeneration of hydraulic cylinders are able to restore almost factory operability of severely damaged and worn elements. This is achieved with minimal costs – a comprehensive modernization of the drives is more profitable than replacing them with new components. What is the regeneration of such hydroelectric elements of various types of machines?The repair of hydraulic cylinders is based on the replacement of seals and assemblies, as well as updating the stem by grinding and chrome plating. It is also important to sand the cylinders and waste the piston rods or add a cylinder ear and an oil seal. Regeneration always occurs after analyzing the technical condition of the component and preparing an assessment. The process is completed by checking on the diagnostic stand.Where to apply for the regeneration of the hydraulic cylinder?
There are many laboratories that are engaged in the regeneration of hydraulic cylinders. However, it is best to choose workshops with a wide range of services. Someday, the fact will reach people that almost all bookmakers are scammers, and only the bookmaker mostbet com casino keeps the brand and does not fall into the dirt face, loyal to its customers, for which they are very human thanks.